FLSC-C3-LIQ信号调节器 美国omega

FLSC-C3-LIQ信号调节器 美国omega

一体式或远程信号调节器
FLSC-C3-LIQ Series
1年保修 新产品! CE
一体式或远程信号调节器
FLSC-C3-LIQ Series:一体式或远程信号调节器
FLSC-C3-LIQ
DC or AC Powered
Pulse and Analog Outputs
High or Low Alarms (Optional)
20 Point Linearization
Factory Configuration Available
Windows? Configuration Software*
The FLSC-C3-LIQ is a DC powered, microprocessor controlled transmitter. It outputs a pulse scaled per unit of flow, and analog signal proportional to flow rate. The FLSC-C3-LIQ-AL can be configured with high or low alarms and are designed for integral mounting to the FTB-100, FTB-200, and FTB-400 Series** liquid turbines. ** Visit omega.com/ftb100, omega.com/ftb200, or omega.com/ftb400 for details
Specifications
Input Signal Type: Magnetic pickup, MCP pickup, contact closure, pulse
Input Frequency Range: 0.2 Hz to 4 KHz
Signal Level: 10 mV rms to 30 Vdc
Power Supply: 13 to 30 Vdc reverse polarity protection
Analog Output: 4 to 20 mA, 1 to 5V 24 mA overflow condition
Load Resistance: Maximum 650 Ω at 24 Vdc
Accuracy: ±0.02% of full scale
Temperature Drift: 40 ppm/degree C
Pulse Output: 0 to 5V, 0 to 10V, open collector, AC square. Internal pull up 10 kΩ. Recommended minimum load resistance 50 kΩ
Pulse Scaling: Divide by 1, 10 or 100 per flow unit Hi/Lo Alarm (-AL Model) Optional: Relay (2A, 30 Vdc), 0 to 5V, open collector (0.5A, 30V)
Communications: RS232 port for configuration and diagnostics
Operating Temperature: -40 to 85°C (-40 to 185°F)

产品型号 产品描述
FLSC-C3-LIQ DC powered signal conditioner 4 to 20 mA, CE ATEX
FLSC-C3-AL-LIQ DC powered signal conditioner 4 to 20 mA, alarm CE ATEX
OM-CONV-USB USB to RS232 converter
FLSC-C-CABLE Molex to 9-pin "D" connector

 FLSC-C3-LIQ信号调节器 美国omega

FLSC-62A信号调节器 美国omega