美国omega SP-HF-K-6高温铸造热电偶探头

美国omega SP-HF-K-6高温铸造热电偶探头

高温铸造热电偶探头
SP-HF-K Series
高温铸造热电偶探头
SP-HF-K Series:高温铸造热电偶探头
SP-HF-K-6
Type K, CHROMEGA?-ALOMEGA? Thermocouple Elements
Measures Hot Metal Surfaces
Rated up to (1260°C) 2300°F
Extra Heavy Duty Design
1/4" Diameter Contact Elements
Works with High Temperature Impedance Type K Temperature Readouts
Rugged, Heavy Duty Aluminum Handle
 

Specifically designed for use where surface temperatures reach up to 1260°C (2300°F) and rough handling is routine, OMEGA’s Foundry Probe uses large, heavy duty tips that can penetrate surface slag to measure the true temperature of the casting. The surface to be measured must be electrically conductive. The thermocouple's lead wires are 16-gage stranded wire with high temperature insulation and stainless steel overbraiding for added protection.
Note: Will not work with analog display systems requiring 10 or 15 ohm input impedance. Specifications
Calibration: Type K, CHROMEGA?-ALOMEGA? Maximum Temperature: 1260°C (2300°F)
Contacts: 1/4" pointed Lead Wire: 183 cm (6'), stainless steel overbraiding
Probe Length: 762 mm (30")
Handle: Rugged Aluminum, type HDX
 

产品型号 产品描述
SP-HF-K-6 Foundry probe with spade lugs termination
SP-HF-K-6-OST-M Foundry probe with OST male connector termination(OST connectors use an economical hollow pin design)
SP-HF-K-6-OGP-M Foundry probe with OGP male connector termination(OGP connectors use a heavy duty solid pin design)

美国omega SP-HF-K-6高温铸造热电偶探头

HDX-SET-GP-K-SMP热电偶 美国omega